A Bézier curve is a parametric curve defined by a small set of points: two anchor points where the curve starts and ends, and one or more control points that pull the curve toward them without lying on it. In graphic design, Bézier curves are the mathematical foundation of vector paths, which is why shapes drawn with the pen tool, outlined fonts and SVG icons can be scaled to any size without losing smoothness.
The concept was developed for automotive body design in the 1960s and later adopted by PostScript, digital typography and virtually every vector editor. Understanding how control handles shape a segment separates clean, economical artwork from paths that are lumpy, heavy and difficult to edit.
How a Bézier curve is calculated
A Bézier curve is calculated by blending its control points with weights that change smoothly as a parameter t runs from 0 to 1. At t = 0 the curve sits on the first anchor, at t = 1 it reaches the last anchor, and in between every point is a weighted average of all defining points, with weights given by Bernstein polynomials.
A helpful geometric view is de Casteljau’s algorithm: connect the points with straight lines, mark the same fraction along each line, connect those new points, and repeat until one point remains. That final point lies on the curve. The construction explains two useful properties: the curve always stays inside the convex hull of its points, and it leaves each anchor in the direction of the adjacent handle.
The number of points determines the degree of the curve. The table below lists the degrees that appear in design tools and formats.
| Degree | Points | Where it appears | Behavior |
|---|---|---|---|
| Linear | 2 anchors | Straight path segments | A straight line |
| Quadratic | 2 anchors, 1 control | TrueType fonts, SVG Q command | Single bend, simpler to compute |
| Cubic | 2 anchors, 2 controls | Pen tools, PostScript, OpenType CFF, SVG C | S-shapes possible, most flexible |
| Higher order | More than 4 points | Mostly CAD and research tools | Hard to control, rarely used |
Anchor points, handles and path continuity
In a vector editor, a path is a chain of cubic Bézier segments joined at anchor points, and each anchor shows direction handles that represent the control points. The angle of a handle sets the tangent direction where the curve meets the anchor, and its length sets how far the curve travels in that direction before bending away.
How the two handles of a shared anchor relate determines whether the join looks smooth or sharp. Designers describe this with continuity levels, summarized in the following table.
| Anchor type | Handle relationship | Continuity | Visual result |
|---|---|---|---|
| Corner point | Handles independent or absent | C0 (position only) | Visible kink or sharp corner |
| Smooth point | Handles collinear, lengths may differ | G1 (tangent) | No kink, curvature may jump |
| Symmetric point | Collinear and equal length | C1 (derivative) | Even, balanced transition |
| Curvature-continuous join | Handles tuned to match curvature | G2 (curvature) | Highlights flow without a break |
Most logo and icon work needs only G1 smoothness, but product renderings, automotive surfaces and premium typefaces often aim for G2 continuity, because reflections and thin strokes reveal small jumps in curvature that the eye perceives as dents.
Bézier curves in vector graphics, fonts and SVG
Bézier curves underpin vector graphics because a path stored as a few coordinates can be redrawn precisely at any resolution, unlike raster graphics, which store fixed pixels. When a file is printed or displayed, the renderer evaluates the curves and rasterizes them at the output resolution, so a logo stays crisp on a business card and on a billboard.
Different formats store curves differently, which matters when artwork moves between applications. The table compares the main implementations.
| Format or technology | Curve type | Practical consequence |
|---|---|---|
| SVG | Quadratic and cubic, plus arcs | Paths stay editable and scale cleanly on the web |
| PostScript and PDF | Cubic | Print output matches the source artwork |
| TrueType fonts | Quadratic | More points needed for the same outline |
| OpenType CFF fonts | Cubic | Fewer points, closer to how type designers draw |
| CSS easing functions | Cubic, via cubic-bezier() | Controls animation timing, not shape |
Image tracing converts raster artwork into Bézier paths automatically. The result is usually far heavier in anchor points than hand-drawn paths, so professionals often redraw important marks manually for cleaner geometry and smaller files.
Drawing clean Bézier paths with the pen tool
Clean Bézier drawing relies on placing as few anchors as possible at structurally meaningful positions. Experienced illustrators put anchors at the extrema of a curve, the points where it is perfectly horizontal or vertical, and keep handles aligned to the horizontal or vertical axes there. This practice, standard in type design, makes outlines predictable, easy to adjust and better suited to font hinting.
- Follow the one-third guideline: a handle roughly one third of the segment length usually gives a natural arc.
- Avoid crossing handles: handles that overlap within one segment create loops or flat spots.
- Use corner points deliberately: convert only where the design truly needs a sharp change of direction.
- Approximate circles carefully: a circle needs four cubic segments with handles about 0.552 of the radius, because a Bézier curve cannot represent a circle exactly.
Most editors also offer curvature tools that place handles automatically from clicked points. They are fast for organic shapes, but the pen tool remains the most precise method for logos, icons and lettering.
Common problems with Bézier paths
Most problems with Bézier paths come from too many anchors or poorly balanced handles, and they typically appear only at large sizes or in production. The following table links visible symptoms to their causes and fixes.
| Symptom | Likely cause | Fix |
|---|---|---|
| Lumpy or wobbly curve | Excess anchor points | Delete redundant anchors and rebalance handles |
| Kink at a smooth join | Handles not collinear | Convert to a smooth point |
| Flat spot in an arc | Handle too short | Lengthen the handle toward one third |
| Small loop or overshoot | Handles crossing or too long | Shorten handles and keep them apart |
| Uneven offset stroke | Offset curves are not exact Béziers | Expand the stroke and simplify the result |
One frequent misconception is that a smoother-looking path needs more points. The opposite is usually true: fewer, well-placed anchors produce more fluid curvature and lighter files.
Put simply
A Bézier curve is a way of describing a smooth line with just a few points and handles. Imagine bending a flexible ruler between two pins while invisible magnets pull it sideways. The pins are the anchor points, and the magnets are the control handles.
Because the computer stores only these positions, not every dot of the line, the shape can be enlarged without becoming blurry. That is why logos and fonts look sharp at any size.
In practice
A freelance designer is redrawing the logo of a local bakery, originally supplied as a low-resolution photo of a painted sign. Automatic image tracing produces a croissant shape with more than 300 anchor points and wavy edges that become obvious when enlarged for the shop window.
The designer redraws the shape with the pen tool, placing anchors only at the curve extrema and keeping handles horizontal or vertical. The final outline uses 38 anchor points, exports to a compact SVG for the website and prints cleanly on a 2-meter vinyl banner. The bakery receives a mark that is sharp at every size and easy to edit for future variations.