ChaoJi

On this page 7

ChaoJi is a high-power DC charging standard developed jointly by Chinese and Japanese industry bodies to succeed both the Chinese GB/T DC system and CHAdeMO with a single, more capable connector. Among charging standards for electric vehicles, it stands out for targeting very high currents with a compact, liquid-cooled plug while keeping a migration path from the large installed base of older chargers.

The name comes from the Chinese word for “super” and is often linked with the Japanese greeting “chao”. The project brought together the China Electricity Council (CEC) and the CHAdeMO Association, and its design work has fed into both national standards and international IEC documents.

How ChaoJi works

ChaoJi works as a DC-only conductive charging system in which the off-board charger supplies direct current straight to the vehicle battery, while the vehicle controls the session through a digital link. It inherits the CAN-based communication used by both GB/T and CHAdeMO, rather than the power-line communication used by CCS, which simplified harmonization between the two parent systems.

A defining design choice is the position of the mechanical lock on the vehicle inlet rather than on the plug. Because the lock and its sensing sit in the car, the connector itself can be lighter and smaller. The plug carries two power contacts, a protective earth and a small set of signal pins, and the cable is actively cooled for the highest power levels.

The table below summarizes the main technical targets that the ChaoJi working groups have described. Exact ratings depend on the published edition and on the equipment class.

ParameterDesign targetPractical meaning
Maximum voltageUp to about 1,500 V DCSupports 800 V and higher battery platforms
Maximum currentUp to about 600 A with coolingEnables very high charging power
Peak powerSeveral hundred kW, up to about 900 kWCovers cars, buses and trucks
CommunicationCAN busContinuity with GB/T and CHAdeMO
Lock locationOn the vehicle inletSmaller, lighter plug
Cable coolingLiquid cooling at high currentThinner, more manageable cable
Main design targets of ChaoJi

ChaoJi editions and backward compatibility

ChaoJi exists in two closely related implementations that share one connector and core protocol but differ in which legacy system they extend. The Chinese implementation, often called ChaoJi-2, is the basis for the newer GB/T DC standard, while the Japanese implementation, often called ChaoJi-1, forms the core of CHAdeMO 3.0.

Backward compatibility is achieved mainly through adapters and dual-protocol chargers rather than through a shared inlet shape. The ChaoJi inlet is physically smaller than both GB/T and CHAdeMO inlets, so an adapter can sit between an older charger plug and a new vehicle, or a station can carry both cable types during the transition.

ImplementationPrimary marketLegacy system extendedCompatibility route
ChaoJi-1JapanCHAdeMOPart of CHAdeMO 3.0, adapters for older chargers
ChaoJi-2ChinaGB/T DCIntegrated into newer GB/T editions, adapters
Shared connectorBothNot applicableSame plug and inlet geometry
ChaoJi implementations and their relationship to legacy systems

This approach reflects a deliberate trade-off: a clean new connector in exchange for a period in which adapters and mixed infrastructure are necessary. The working groups judged that a fresh design was the only realistic way to reach ultra-high current without the bulk of the earlier connectors.

How ChaoJi compares with other DC charging standards

ChaoJi differs from CCS and NACS mainly in its communication method, lock placement and regional backing. CCS and NACS rely on power-line communication under ISO 15118 or DIN SPEC 70121 and lock the plug from the vehicle side as well, but they evolved from AC connectors, whereas ChaoJi was designed as a dedicated DC interface.

SystemCommunicationAC on same inletMain regions
ChaoJiCAN busNo, separate AC inletChina and Japan, planned wider use
GB/T DCCAN busNo, separate AC inletChina
CHAdeMOCAN busNo, separate AC inletJapan, legacy models elsewhere
CCS1 and CCS2Power-line communicationYes, combined inletNorth America, Europe and others
NACSPower-line communicationYes, shared pinsNorth America
ChaoJi compared with other DC charging systems

In practice, the comparison is less about peak power, since modern CCS and NACS hardware also reaches several hundred kilowatts, and more about ecosystem fit. A vehicle sold in China must support the domestic DC standard, so ChaoJi matters chiefly as the future of the world’s largest EV market and as the upgrade path for CHAdeMO users.

Adoption status and practical considerations

ChaoJi adoption is gradual and uneven, because a new connector only gains value when vehicles and chargers arrive together. Chinese regulators have incorporated the design into updated national DC charging specifications, while in Japan CHAdeMO 3.0 has progressed more slowly as several manufacturers weighed other connector options for export markets.

For charging operators and fleet planners, the key questions are which vehicles will arrive with ChaoJi inlets and how long legacy GB/T or CHAdeMO vehicles will remain in service. Mixed sites with multiple cable types, or adapters approved by the vehicle manufacturer, are the usual bridge.

SituationRecommended approachReason
New site in China, mixed fleetDual cables: GB/T DC and ChaoJiServes current and incoming vehicles
Heavy-duty depotHigh-current ChaoJi with coolingShort dwell times need high power
Japanese site with CHAdeMO usersKeep CHAdeMO, plan upgrade pathLarge legacy fleet still active
Export-focused fleetFollow destination market standardChaoJi is not common outside Asia
Planning decisions for ChaoJi infrastructure

Limitations and common misconceptions

The main limitation of ChaoJi is limited global reach: outside China and Japan, the dominant systems remain CCS2 and, in North America, NACS. A frequent misconception is that ChaoJi is already the universal world standard; it was designed with that ambition, but market adoption has not followed in Europe or North America.

  • Peak power is not typical power: real sessions are limited by battery temperature and the charging curve.
  • Adapters are not universal: only adapters specified for the exact vehicle and charger pairing should be used.
  • A separate AC inlet is still needed: ChaoJi covers DC charging only.
  • Edition details matter: ratings and features vary between national and international documents.

The idea in brief

ChaoJi is a new plug design for fast charging electric vehicles. China and Japan each had their own older fast-charging plug. ChaoJi merges both into one smaller, stronger plug. It can handle much more power.

Think of it as a modern replacement that respects the old system. Older chargers can work with new cars through adapters. Stations can also keep both plug types for a while. Its main strength is very high power. Its main weakness is that it is used mostly in Asia.

A practical scenario

A city bus operator in China plans to replace 120 diesel buses with electric models over three years. Older electric buses in its fleet use GB/T DC inlets, while the new models arrive with ChaoJi inlets designed for higher current.

Instead of building two separate depots, the operator installs chargers with dual cables: one GB/T DC cable for the existing buses and one liquid-cooled ChaoJi cable for the new ones. Each charger cabinet shares its power modules between both outlets, delivering up to 360 kW to a single bus during midday layovers of about 20 minutes. The depot serves both generations without adapters, and the operator can retire the GB/T cables as older buses leave service, avoiding a second round of construction.