Megapixel

Also known as: MP

On this page 7

A megapixel (MP) is a unit of one million pixels, used in photography to express the resolution of an image sensor or a digital image. A sensor that records 6000 by 4000 pixels produces 24 million pixels, so it is described as a 24-megapixel camera. In the field of cameras & sensors, the megapixel count tells how much spatial detail a camera can sample, but it does not by itself describe image quality.

Megapixel figures became the most prominent specification in consumer marketing during the early years of digital photography. Experienced photographers treat the number as one factor among several, alongside sensor size, pixel pitch, lens quality and processing.

How megapixels are counted on a sensor

Megapixels are counted by multiplying the horizontal and vertical pixel dimensions of the output image and dividing by one million. Each pixel corresponds to a photosite, a light-sensitive element on the CMOS or CCD sensor that converts photons into an electrical charge. Manufacturers usually distinguish effective megapixels, which contribute to the final image, from total megapixels, which include masked pixels used for black-level calibration.

In a sensor with a Bayer filter, each photosite records only red, green or blue light. Full color for every pixel is reconstructed through demosaicing, an interpolation step that estimates the two missing color values from neighbors. A 24 MP Bayer sensor therefore captures 24 million luminance samples but fewer independent color samples, which is why real color resolution is lower than the headline figure suggests.

The table below lists common sensor resolutions with their pixel dimensions in a 3:2 aspect ratio.

MegapixelsPixel dimensions (3:2)Typical camera class
12 MP4240 × 2832Low-light video and sports bodies
24 MP6000 × 4000Mainstream APS-C and full frame
33 MP7008 × 4672Hybrid photo and video models
45 MP8192 × 5464High-resolution full frame
61 MP9504 × 6336Landscape and studio full frame
100 MP11648 × 8736 (4:3)Medium format
Typical megapixel counts and pixel dimensions

Megapixels, sensor size and pixel pitch

Megapixel count interacts with sensor size through pixel pitch, the distance between the centers of adjacent photosites. Fitting more pixels onto the same area makes each one smaller, and a smaller photosite collects fewer photons per exposure. At the pixel level this lowers the signal-to-noise ratio, although when images are compared at the same output size, modern sensors show surprisingly small differences in noise.

Overall noise and dynamic range depend more on total sensor area than on pixel count, because a larger sensor gathers more light in total at the same exposure. A 24 MP full frame sensor and a 24 MP Micro Four Thirds sensor share the same resolution, yet the full frame sensor receives about four times the light. The table compares approximate pixel pitches at a similar resolution.

Sensor formatResolutionApproximate pixel pitch
Medium format 44 × 33 mm100 MP3.8 µm
Full frame 36 × 24 mm24 MP6.0 µm
Full frame 36 × 24 mm61 MP3.8 µm
APS-C 23.5 × 15.6 mm26 MP3.8 µm
Micro Four Thirds 17.3 × 13 mm20 MP3.3 µm
Smartphone 1/1.3 inch50 MP1.2 µm
Approximate pixel pitch by sensor format

Smartphone sensors with very high counts often use a Quad Bayer sensor layout, grouping four photosites under one color filter. In low light the camera merges each group through pixel binning, delivering a 12.5 MP image from a 50 MP sensor with better noise performance.

What megapixels mean for print and display

Megapixels determine how large an image can be reproduced at a given pixel density before individual pixels or interpolation become visible. Fine art printing traditionally targets 300 pixels per inch for close viewing, while large prints seen from a distance work well at 150 ppi or lower. Screens need far less: a 4K display shows about 8.3 MP, so most cameras exceed screen resolution several times over.

The following table shows the largest print size at 300 ppi and the main practical benefit of each resolution class.

ResolutionPrint size at 300 ppiPractical benefit
12 MP14 × 9 inAmple for web, social media and albums
24 MP20 × 13 inModerate cropping and gallery prints
45 MP27 × 18 inHeavy cropping for wildlife and sport
100 MP39 × 29 inLarge wall prints and reproduction
Print size and practical benefit by resolution

Because linear resolution scales with the square root of the pixel count, doubling megapixels increases detail along each edge by only about 41 percent. Moving from 24 MP to 48 MP is visible, but it is not twice as sharp.

Trade-offs of high megapixel cameras

High megapixel cameras trade detail and cropping flexibility for heavier demands on the whole system. Each raw file at 61 MP can exceed 60 MB uncompressed, which slows burst rates, fills memory cards faster and lengthens editing. Smaller pixels also reveal every flaw in focus, lens sharpness and camera shake.

  • Lens resolving power limits what reaches the sensor; an older or cheaper lens may not deliver detail at the pixel level of a 45 MP sensor.
  • Diffraction becomes visible at wider apertures on dense sensors, often from about f/8 on high-resolution full frame bodies.
  • Motion blur shows at shutter speeds that looked sharp on lower-resolution cameras, so faster speeds or stabilization are needed.
  • Sensor readout usually takes longer on high-resolution sensors, increasing rolling shutter distortion unless the design uses a stacked sensor.
Use caseSuggested rangeReason
Events and low-light video12 to 24 MPFast readout and manageable files
General travel and portraits24 to 33 MPBalanced detail and handling
Wildlife with distant subjects33 to 50 MPCropping replaces extra focal length
Landscape, architecture, product45 MP and aboveMaximum detail for large output
Choosing a resolution for the task

Common misconceptions about megapixels

The most persistent misconception is that more megapixels mean better photographs. Resolution affects only the finest detail, while color accuracy, dynamic range, autofocus and lens quality usually shape the result more. A phone advertising 200 MP and a full frame camera at 24 MP do not deliver comparable images, because sensor area and optics differ by orders of magnitude.

A second error is confusing sensor megapixels with output megapixels. Computational photography pipelines may upscale, bin or merge multiple frames, so the file size does not always reflect what a single exposure resolved.

The short version

A megapixel is one million tiny dots that make up a digital photo. A 24-megapixel camera builds each picture from about 24 million dots, which lets the image be printed large or cropped without looking blocky.

More dots help only up to a point. A photo with fewer, larger dots from a good sensor and lens often looks better than one with many cramped dots. The number measures detail, not overall quality.

Where it makes a difference

A wildlife photographer photographs shorebirds from a hide with a 400 mm lens and cannot move closer without scaring the birds. With a 45 MP full frame camera, the photographer crops the frame to about 40 percent of its width, which still leaves roughly 7 MP of real detail, enough for a sharp 10 × 7 inch print and any web use.

The same photographer covers an indoor wedding with a 24 MP body instead. Files are half the size, the buffer clears faster during the ceremony, and noise at ISO 6400 remains comparable at the final print size. Matching resolution to the job saves storage and editing time without any visible loss.