Telepresence robot

On this page 7

A telepresence robot is a remotely operated mobile robot that carries a display, cameras, microphones and speakers, allowing a person in another location to see, hear, speak and move through a physical space as if present. In robotics, it sits between videoconferencing and autonomous service robots: the human supplies the judgment, while the machine supplies mobility and a physical presence.

Unlike a fixed video call, a telepresence robot lets the remote user choose where to look and where to go, join conversations in a corridor or inspect equipment on a shop floor. Most units combine a wheeled base with shared autonomy, meaning the operator issues high-level commands while onboard software avoids obstacles and handles docking.

How a telepresence robot works

A telepresence robot works as a closed loop between a remote operator and a mobile platform: video and audio stream from the robot to the operator, and driving commands stream back over the network. The operator usually uses a web browser, desktop application or tablet, and the robot connects through Wi-Fi or a cellular link to a cloud relay or a direct peer-to-peer session.

Real-time media normally relies on protocols such as WebRTC, which adapt bitrate to available bandwidth. The onboard robot controller translates velocity commands into motor outputs, reads safety sensors and enforces speed limits, so that a dropped connection stops the robot rather than leaving it moving.

The table lists the main subsystems and what each contributes to the experience of being present.

SubsystemTypical componentsRole in telepresence
Mobility baseDifferential drive, two to four wheelsMoves the operator through the site
Head unitDisplay, wide-angle camera, speakerShows the operator and captures the view
Audio arraySeveral microphones with echo cancellationPicks up voices in noisy rooms
Navigation sensorsLidar, depth cameras, ultrasonic, cliff sensorsObstacle and drop-off avoidance
ConnectivityWi-Fi, LTE or 5G modemCarries video and control traffic
Docking stationCharging contacts, alignment markersRecharges between sessions
Core subsystems of a telepresence robot

Key parameters and design trade-offs

The usefulness of a telepresence robot depends on a handful of measurable parameters, and improving one usually costs another. End-to-end latency matters most: below roughly 200 milliseconds driving feels direct, while delays above 500 milliseconds make operators overshoot turns and collide with obstacles.

Typical values below reflect commercial and research units; they vary with network quality and design priorities.

ParameterTypical rangeWhat it affects
Glass-to-glass latency150 to 600 msDriving precision and conversation flow
Uplink bandwidth1 to 4 Mbit/s for HD videoImage clarity and frame rate
Top speed0.5 to 1.5 m/sAbility to keep pace while walking
Battery runtime2 to 12 hoursLength of continuous sessions
Display height1.2 to 1.7 m, often adjustableNatural eye level in conversation
Robot mass5 to 50 kgStability, safety and portability
Typical telepresence robot parameters

A taller head improves eye-level contact, which strongly influences how colleagues treat the remote person, but raises the center of gravity and the risk of tipping. Lightweight designs are cheaper and safer around people, yet they struggle with thresholds, thick carpets and ramps.

A telepresence robot is a specialized service robot whose primary payload is human communication rather than physical work. Its closest relatives differ mainly in who makes the decisions and whether the robot manipulates objects.

Robot typeWho decidesMain purposeManipulation
Telepresence robotRemote human, with assistanceCommunication and remote presenceRarely
Autonomous mobile robotOnboard planning softwareTransport and logisticsSometimes
Teleoperated manipulatorRemote human, continuouslyHandling objects at a distanceAlways
HumanoidMostly autonomous, sometimes teleoperatedGeneral tasks in human spacesUsually
DronePilot or autopilotAerial observation and deliveryRarely
How telepresence robots compare with neighboring robot types

The line is blurring. Some autonomous mobile robots offer a telepresence mode for remote inspection, and some humanoid platforms are teleoperated to collect training data. The defining feature remains that a human is in the loop for the social interaction.

Where telepresence robots are used and how to choose one

Telepresence robots are most valuable where a remote person needs to move between locations inside a building and interact spontaneously, rather than attend a single scheduled meeting. The decision table matches common settings with suitable features.

SettingRecommended featuresReason
Hospital roundsHigh-resolution zoom camera, auto-dockingClinicians read monitors and charts remotely
School attendanceSimple controls, adjustable heightStudents with illness join classes and peers
Office collaborationGood microphones, long battery lifeRemote staff join corridor discussions
Factory inspectionRobust base, cellular backup, lightsExperts assess equipment without travel
Museum visitsGuided routes, accessibility optionsDistant visitors explore exhibits
Choosing a telepresence robot by setting

Before deployment, teams should verify Wi-Fi coverage along every route, since roaming gaps between access points cause frozen video and emergency stops. Elevators, heavy doors and steps usually require assisted access or building automation integration.

Limitations, risks and common misconceptions

The most common misconception is that a telepresence robot replaces physical presence entirely. It conveys sight and sound well, but it cannot shake hands, open most doors or handle objects, and conversational cues such as gaze direction are only partly preserved.

  • Network dependence: quality collapses on congested or patchy wireless networks.
  • Privacy concerns: a moving camera in hospitals, schools or homes requires clear consent rules and visible session indicators.
  • Security exposure: remote access accounts must use strong authentication, because a hijacked unit becomes a mobile surveillance device.
  • Social acceptance: people may ignore or talk over the robot unless the remote user has authority and eye-level presence.
  • Physical safety: low-mass units are generally safe, but collisions on stairs or with children demand cliff sensors and speed limits.

A plain-language summary

A telepresence robot is like a video call on wheels. A screen showing a person’s face sits on top of a small rolling base. The person, who may be in another city, steers it from a laptop and sees through its camera.

This lets someone visit a classroom, walk through a hospital ward or join a chat by the coffee machine without traveling. The robot handles the moving around and avoids bumping into things, while the human does the talking and deciding.

An example from practice

A regional hospital network has one stroke neurologist on night duty for five smaller hospitals. Each emergency department keeps a telepresence robot docked near the resuscitation bay, connected over the hospital Wi-Fi with a cellular backup link.

When a patient arrives with stroke symptoms, a nurse wakes the robot and the neurologist logs in from home within minutes. The specialist drives the robot to the bedside, uses the optical zoom camera to observe facial symmetry and pupil response, speaks with the patient and family, and reviews scans on a second screen.

The neurologist then advises on clot-dissolving treatment while the local team acts. The network reports that specialist assessment starts far sooner than when patients were transferred first, which matters because stroke outcomes depend heavily on time to treatment.