Color volume

On this page 7

Color volume is the three-dimensional range of colors that a display, signal format or piece of content can reproduce at every luminance level, combining color gamut with brightness into one solid. In HDR video, it describes far more accurately than a gamut diagram what a screen can actually show, because a display that covers a wide gamut at low brightness may lose much of that saturation as it approaches peak luminance.

The concept matters because high dynamic range and wide color gamut were introduced together. A format such as PQ with Rec. 2020 primaries defines an enormous potential color volume, while real displays and real content occupy only part of it, and the gap between them is what tone mapping and gamut mapping must manage.

How color volume extends the gamut into brightness

A traditional color gamut is drawn as a flat triangle on a chromaticity diagram, such as CIE 1931 xy. That diagram shows hue and saturation but deliberately removes luminance, so it cannot tell whether a display reproduces a saturated red at 50 nits or at 1,000 nits. Color volume adds the missing axis and turns the triangle into a solid.

The shape of that solid is not a prism. In an additive RGB display, the brightest colors are near white, where all three primaries are fully driven. Saturated colors use only one or two primaries, so they peak at a lower luminance. The resulting volume narrows toward the top, and the way it narrows determines how bright colorful highlights can look.

The components that define a color volume are summarized below.

ComponentWhat it definesTypical HDR reference
Color primariesHue and saturation limits of the baseRec. 2020 container, P3 mastering
White pointNeutral reference for all colorsD65
Peak luminanceHeight of the volume at white1,000 to 4,000 nits mastering
Black levelFloor of the volumeAbout 0.005 nits or lower on OLED
Transfer functionHow code values map to lightPQ or HLG
Components of a color volume

Measuring and expressing color volume

Color volume is measured in a perceptually uniform color space, because volumes computed in xyY or plain RGB exaggerate some regions and compress others. Common choices are CIELAB, ICtCp and the more recent Jzazbz space, which handle high luminance and wide gamut better than older models.

Measurement involves displaying a grid of test patches at many brightness levels and saturations, reading each with a spectroradiometer or colorimeter, and calculating the enclosed volume. The result is often given as a percentage of a reference volume, such as Rec. 2020 at a given peak luminance, rather than as an absolute number.

MetricBasisStrengthWeakness
Gamut coverage (2D)Area on xy or u’v’ diagramSimple and widely quotedIgnores luminance entirely
CIELAB volumeVolume in L*a*b* unitsLong-established methodLess accurate at HDR levels
ICtCp volumeVolume in a PQ-based spaceDesigned for HDR signalsLess familiar outside engineering
Millions of distinguishable colorsVolume divided by a just-noticeable stepIntuitive for comparisonDepends on the chosen step size
Ways of expressing color volume

Marketing figures deserve caution. A claim such as “100 percent color volume” is meaningful only when the reference space, the peak luminance and the measurement method are stated, and different test methods can produce noticeably different results for the same display.

Color volume connects several neighboring ideas that are often confused. Wide color gamut describes only the base of the volume, peak luminance describes only its height, and tone mapping is the process that fits one volume inside another.

TermDimension coveredRelation to color volume
Wide color gamutHue and saturationThe base of the volume
Peak luminanceMaximum brightnessThe top of the volume near white
Dynamic rangeRatio of brightest to darkestThe vertical extent of the volume
Tone mappingLuminance compressionFits content volume into display height
Gamut mappingSaturation compressionFits content volume into display base
HDR metadataDescription of mastering conditionsTells the display the source volume
Color volume and neighboring terms

The mastering display color volume metadata defined in SMPTE ST 2086 records the primaries, white point and luminance range of the reference monitor used during grading. Formats such as HDR10, HDR10+ and Dolby Vision carry this information so that the playback device knows how large the source volume was and can plan its own mapping.

Why color volume matters in HDR production

In practice, every stage of the chain has a different color volume: the camera, the mastering monitor, the delivery format and the consumer display. Content is usually mastered in a P3 gamut inside a Rec. 2020 container at 1,000 or 4,000 nits, while many consumer televisions reach only part of that range.

  • Colorists watch for saturated highlights, such as neon signs or sunsets, that exceed what common displays can render.
  • Display engineers design tone mapping that preserves hue when bright saturated colors must be compressed.
  • Delivery teams verify that mastering metadata, including MaxCLL and MaxFALL, accurately describes the content.
  • Reviewers compare displays by color volume rather than by gamut area or peak brightness alone.

Display technology strongly shapes the volume. The following comparison describes typical tendencies, which vary considerably between individual models.

Display typeVolume strengthVolume limitation
WOLEDDeep blacks, accurate low levelsSaturated colors lose brightness near peak
QD-OLEDWide gamut held at higher brightnessPeak luminance limited in large areas
Mini-LED LCDHigh peak and sustained brightnessRaised blacks and blooming near highlights
Standard LCDAdequate for SDRNarrow gamut and limited HDR height
Typical color volume tendencies by display type

Limitations and common misconceptions

Color volume is a summary of capability, not a guarantee of quality. Two displays with the same measured volume can still differ in tone mapping, uniformity, viewing angle and accuracy within the volume.

  • Gamut percentage equals color volume: a 2D coverage figure ignores how colors behave at high brightness.
  • Brighter always means a larger volume: a bright white subpixel can raise peak luminance without adding saturated color.
  • Content fills the whole format: almost no real program uses the full Rec. 2020 and 10,000-nit PQ range.
  • Bigger volume means accurate color: volume measures reach, while accuracy depends on calibration and mapping.
  • Volume is fixed: many displays reduce brightness over large bright areas, shrinking the usable volume in full-screen scenes.

A non-technical view

Think of all the colors a screen can show as a shape rather than a flat drawing. The width of the shape is how vivid its colors can be, and the height is how bright it can get. Color volume is the size of that whole shape.

This matters because many screens can show a vivid red only when it is fairly dim. When the red has to glow brightly, it fades toward pink or orange. A screen with a larger color volume keeps colors vivid even when they are bright, which is a big part of what makes good HDR pictures look lifelike.

A concrete example

A post-production team grades a night-time city documentary in HDR on a reference monitor with a 1,000-nit peak and close to full P3 coverage. One scene features a saturated red neon sign that the colorist pushes to about 600 nits, where it looks striking on the reference display.

During quality control, the team checks the master on a consumer television that reaches about 700 nits on white but only about 250 nits on saturated red. On that set, the sign shifts toward orange and loses detail as tone mapping compresses it. The colorist reduces the sign to about 350 nits and slightly lowers saturation in its brightest core. The result is a grade that still feels vivid on the reference monitor and holds its hue on typical home displays, because the content now sits within the color volume most viewers actually have.